VSAT L-Band IF input CODAN 6700 series VSAT C-Band and CODAN 6900 series Ku-Band VSAT transceivers offer a wide range of distinctive advantages and enhanced features for satellite communications systems based in remote or challenging geographic regions.
Available in all common VSAT C-Band and VSAT Ku-Band operating frequencies-and a range of output powers - the CODAN 6700 and CODAN 6900 series provide industry leading technical performance.
Key features
Configuration
The CODAN 6700 and CODAN 6900 series VSAT transceivers are based on a compact L-Band IF input Block Up Converter (BUC). This module is available in VSAT C-Band and VSAT Ku-Band versions and a range of RF output powers. Receive capability is provided by a range of LNBs to cover the various VSAT C-Band and VSAT Ku-Band receive frequency ranges.
Durability The CODAN 6700 and CODAN 6900 series VSAT transceivers are designed and tested to meet all their performance specifications over an ambient temperature range of -40°C to +55°C and up to 100% relative humidity, ensuring long-term survival in extreme conditions. Field experience for CODAN VSAT transceivers shows that MTBFs of greater than 100,000 hours can be expected.
RF performance
RF performance is superior, particularly: intermodulation performance, gain stability over temperature and flatness across the IF band. The CODAN 6700 and CODAN 6900 series VSAT transceivers also boast industry leading spurious and harmonics specifications compliant with CE requirements. Guaranteed RF performance ensures expensive system link margins do not have to be used to cope with RF transceiver variations.
Power
CODAN L-Band IF VSAT transceivers all feature low power consumption and low temperature rise, ensuring internal components do not suffer undue stress.
The CODAN 6700 and CODAN 6900 series Low power VSAT (LBUC) modules are powered via the transmit IF cable. The Medium power VSAT (MBUC) modules are AC mains powered.
Internal protection
Internal protection against high temperature and short or open circuit RF output is standard. As well, input voltage detection ensures reliable shutdown and restart under brownout or blackout conditions.
External protection
The CODAN VSAT transceiver is completely protected from the elements without external user controls. The VSAT BUC modules are fully sealed and pressure tested to 34 kPa (5 psi). Particle and moisture penetration is rated to IP68. High quality powder coat paint is used to protect the modules from corrosion.
Advanced features
Enhanced monitor and control
All operating functions can be controlled and monitored via the serial M&C facilities. The standard output power meter facility features high accuracy and the ability to measure both CW and burst mode signals.
The CODAN 6700 and CODAN 6900 series VSAT transceivers is capable of operating with a PC without requiring proprietary software.
The user has the choice of an FSK based M&C interface, which is fed via the transmit IF cable for use with intelligent modems or separate RS232 or RS422/RS485 interfaces.
Multiple M&C protocols are provided to enable integration into a number of network management systems.
IF Interface unit
In cases where the modem is not able to drive the transceiver directly, an optional indoor unit is available. This unit connects to the modem at the L-Band transmit and receive IF interfaces, and multiplexes the required power and reference signals on the IF cables. In addition, it also converts the M&C FSK to separate RS232 and RS422/RS485 interfaces.
Major configuration options
Refer to individual specification sheets for allowed combinations of configuration options.
Receive frequency bands (GHz)
Receive bands are selected by the use of an appropriate LNB. Standard frequency bands are listed below. Noise temperatures of 40 K (C-Band) and 75 K (Ku-Band) are available.
Transmit frequency band (GHz)
|
VSAT C-Band
|
VSAT Ku-Band |
| 5.850 - 6.725 è 5.850-6.425 |
14.0-14.5; 13.75-14.5 è 13.75-14.25 |
Block Up Converter RF output power
|
VSAT C-Band
|
VSAT Ku-Band
|
|
CODAN 6705 - 5W
|
CODAN 6904 - 4W
|
| CODAN 6710 - 10W |
CODAN 6908 - 8W |
| CODAN 6720 - 20W |
CODAN 6908 - 16W |
| CODAN 6725 - 25W |
CODAN 6925 - 25W |
| CODAN 6740 - 40W |
|
| CODAN 6760 - 60W |
|
CPR137G waveguide output standard,
N female coaxial connector optional |
PBR120 (WR75) waveguide output standard |
Power Input
|
24 V DC nominal
|
|
48 V DC nominal
|
| 115/230 V AC nominal |
Accessories
- CODAN Hand-held Controller
- CODAN Remote Controller
- CODAN IF Interface Unit
- CODAN Power Suppliers
- CODAN Low Noise Block Converters (LNBs)
- CODAN Transmit Reject Filter (TRFs)
- CODAN Antenna mounting kits
- CODAN Redundancy Systems
CODAN quality and service
All L-Band IF VSAT transceivers are built and tested in CODAN ISO9001 quality certified manufacturing facility, and undergo 100% burn in and performance monitoring over the temperature range specified.
CODAN fully trained staff and agents provide in-factory and in country training services and complete installation and on-site assistance. This service is backed up by a 24 hour customer service line and a warranty of three years on manufacturing, design or component defects.
CODAN L-Band IF Transceiver VSAT C-Band 6700 series specifications
Low power Block Up Ñonverter (LBUC)
IF input
|
Frequency range
Standard band
Extended band
|
950 to 1525 MHz
950 to 1750 MHz
|
|
Impedance
|
50 Ω
|
| Connector |
N female
|
|
VSWR
|
1.5:1 maximum |
Gain specification
|
Gain at 0 dB attenuator setting
CODAN 6705, 5W
CODAN 6710, 10W
CODAN 6720, 20W
|
68 dB nominal
71 dB nominal
74 dB nominal
|
|
Transmit attenuator
|
0, 4, 8 and 12 dB settings
|
|
Gain flatness
|
±1.5 dB maximum, 40 MHz
±2.5 dB maximum, full band
|
|
Gain stability
Over any 50°C range
Over –40°Ñ to +55°Ñ
- when frequency set
-when frequency not set
|
±1,5 dB maximum
±2,0 dB maximum
±3,0 dB maximum
|
RF output
|
Frequency range
VSAT Standard band
VSAT Extended band
|
5.850 to 6.425 GHz
5.850 to 6.725 GHz
|
|
Power @ 1 dB GCP
CODAN 6705, 5W
CODAN 6710, 10 W
CODAN 6720, 20 W
|
+37.0 dBm typical
+40.0 dBm typical
+43.0 dBm typical
|
|
Carrier to intermodulation ratio
|
-26 dBc minimum (two carriers, each @ 6 dB OPBO from 1 dB GCP)
|
|
Output power meter
Range
|
Down to P1dB - 15 dB
|
Absolute accuracy
when frequency set
when frequency not set |
±1,0 dB maximum
±2,0 dB maximum
|
|
Relative accuracy
when frequency set
when frequency not set
|
±0,5 dB maximum
±1,0 dB maximum
|
|
Modes
|
CW, burst with adjustable threshold
|
| Connector |
CPR137G with 5.0 mm through holes, N female optional
|
| VSWR |
2.0:1 maximum
|
Spurious output
| Spurious |
-50 dBc maximum @ 3 dB OPBO
|
|
Harmonics
|
-60 dBc maximum @ 3 dB OPBO
|
Phase noise (SSB)
|
100 Hz
|
-63 dBc/Hz maximum
|
|
1 kHz
|
-73 dBc/Hz maximum
|
| 10 kHz |
-83 dBc/Hz maximum
|
| 100 kHz |
-93 dBc/Hz maximum
|
Frequency reference
|
Frequency
|
10MHz
|
|
Level
|
-10 to +5 dBm
|
Frequency conversion
|
VSAT Standard band
|
7300, 7375 MHz user selectable
|
|
VSAT Extended band
|
7300, 7375, 7600, 7675 MHz user selectable
|
|
Sense
|
Spectrum inverting
|
Gain specification
| Gain flatness |
±0,75 dB maximum, 40MHz
±1,5 äÁ dB maximum, full band
|
RF output
|
Power @ 1 dB GCP
CODAN 6710 10W
CODAN 6720 20W
|
+40.0 dBm minimum
+dBm minimum
|
|
VSWR
|
1.5:1 maximum
|
Spurious output
|
Spurious output
|
Meets EN 301 443 with 53 dBi antenna gain
|
Monitor and control (FSK)
|
Mode
|
FSK modulation
|
|
Protocol
|
User selectable
|
|
Data format
|
User selectable
|
|
Connector
|
Multiplexed on the transmit IF
|
|
Data transmitter
Frequency
Deviation
Sense
|
650 kHz ± 1%
60 kHz ±1%
+60 kHz = mark, -60 kHz = space
|
|
Output level
|
-3 dBm nominal
|
|
Start tone time
|
10 ms minimum
|
|
Data receiver
Nominal frequency
Locking range
Input sensitivity
|
650 kHz
±30 kHz
-15 dBm minimum
|
Monitoring and control (digital)
|
Interfaces
|
RS232, RS485 (4-wire, 2-wire strapable)
|
|
Data format
RS232
RS485
|
9600 bit/s, 8 bits no parity, 1 stop bit, ASCII protocol
User selectable format and protocol
|
|
Connector
|
MIL-C-26482 12-14S socket
|
Monitoring and control functions
Serial interface functions
Power amplifier on, Output power, Temperature, Fault status, Model number, Serial number, Software version, Compensation frequency, Transmit attenuator, Burst threshold, Packet address, Packet protocol.
Other monitoring functions
Loss of lock causes alarm contact closure, reduces BUC current drain by >50% and attenuates RF output by >70 dB. LED indicators for: Power on, Transmit on and BUC fault.
Power
Power supply
|
24 V nominal (6705)
|
19 to 35 V DC
|
|
48 V nominal (6705, 6710, 6720)
|
42 to 60 V DC
|
Power connector options
|
CODAN 6705, 6710, 6720
|
Via transmit IF connector
|
|
CODAN 6710, 6720
|
Via external DC input connector
|
Power consumption
|
CODAN 6705, 5 W
|
60W maximum
|
|
CODAN 6710, 10 W
|
105W maximum
|
|
CODAN 6720, 20 W
|
130W maximum
|
Environmental
|
Operating temperature range
|
-40°Ñ to +50°Ñ
|
|
Relative humidity
|
100%
|
|
Cooling
6705
6710, 6720
|
Convection
Forced air
|
|
Weatherproofing
|
Sealed to 34 kPa
|
Physical
Size
|
CODAN 6705
|
335mm L x 182mm W x 104mm H
|
|
CODAN 6710, 6720
|
335mm L x 182mmW x 137mm H
|
Weight
|
CODAN 6705
|
5,6 kg
|
|
CODAN 6710, 6720
|
5,8 kg
|
Mounting
|
Feed mounting
|
Standard
|
| Boom mounting |
Standard on N-output models
Optional on waveguide output model |
CODAN BUC Low power VSAT Ku-Band 6900 series specifications
Baseline RF specifications
IF input
|
Frequency range
Standard & Offset band
Extended band
|
950 – 1450 MHz
950 – 1700 MHz
|
|
Impedance
|
50 Ω
|
| Connector |
N female
|
|
VSWR
|
1,5:1 maximum |
Gain specification
|
Gain @ 0 dB attenuator setting
CODAN 6904
CODAN 6908
|
67 dB nominal
70 dB nominal
|
|
Transmit attenuator
|
0, 4, 8 and 12 dB settings
|
|
Gain flatness
|
±1.5 dB maximum, 40MHz
±2.5 dB maximum, full band
|
|
Gain stability
Over any 50°C range
Over –40°Ñ to +55°Ñ
- when frequency set
- when frequency not set
|
±1,5 dB maximum
±2,0 dB maximum
±3,0 dB maximum
|
RF output
|
Frequency range
VSAT Standard band
VSAT Extended band
VSAT Offset band
|
14.0 to 14.5 GHz
13.75 to 14.5 GHz
13.75 to 14.25 GHz
|
|
Ìîùíîñòü ïî êîìïðåññèè 1 äÁ (P1äÁ)
CODAN 6705, 5 Âò
CODAN 6710, 10 Âò
CODAN 6720, 20 Âò
|
+37.0 äÁì òèïè÷íûé
+40.0 äÁì òèïè÷íûé
+43.0 äÁì òèïè÷íûé
|
|
Carrier to intermodulation ratio
|
-25 dBc minimum (two carriers, each @ 6 dB OPBO from 1 dB GCP)
|
|
Output power meter
Range
|
Down to P1dB - 15 dB
|
Absolute accuracy
when frequency set
when frequency not set |
±1,0 dB maximum
±2,0 dB maximum
|
|
Relative accuracy
when frequency set
when frequency not set
|
±0,5 dB maximum
±1,0 dB maximum
|
|
Modes
|
CW, burst with adjustable threshold
|
| Connector |
PBR120 flange (WR75) with 4.2 mm through holes
|
| VSWR |
2.0:1 maximum
|
Spurious output
|
Spurious
|
-50 dBc maximum @ 3 dB OPBO
|
|
Harmonics
|
-60 dBc maximum @ 3 dB OPBO
|
Phase noise (SSB)
|
100 Hz
|
-63 dBc/Hz maximum
|
|
1 kHz
|
-73 dBc/Hz maximum
|
| 10 kHz |
-83 dBc/Hz maximum
|
| 100 kHz |
-93 dBc/Hz maximum
|
Frequency reference
|
Frequency
|
10 MHz
|
|
Level
|
-10 - +5 dBm
|
| Input connector |
Multiplexed on the transmit IF
|
Frequency conversion
|
Standard & Extended band
|
15450MHz
|
|
Offset band
|
15200MHz
|
|
Sense
|
Spectrum inverting
|
Enhanced RF specifications
Gain specification
| Gain flatness |
±0,75 dB maximum, 40MHz
±1,5 dB maximum, full band
|
RF output
|
Power @ 1 dB GCP
CODAN 6904, 4W
CODAN 6908, 8W
|
+36.0 dBm minimum
+39.0 dBm minimum
|
|
VSWR
|
1.5:1 maximum
|
Spurious output
|
Spurious output
|
Meets EN 301 443 with 54 dBi antenna gain
|
Monitor and control (FSK)
|
Mode
|
FSK modulation
|
|
Protocol
|
User selectable
|
|
Data format
|
User selectable
|
|
Connector
|
Multiplexed on the transmit IF
|
|
Data transmitter
Frequency
Deviation
Sense
|
650 kHz ± 1%
60 kHz ±1%
+60 kHz = mark, -60 kHz = space
|
|
Output level
|
-3 dBm nominal
|
|
Start tone time
|
10 ms minimum
|
|
Data receiver
Nominal frequency
Locking range
Input sensitivity
|
650 kHz
±30 kHz
-15 dBm minimum
|
Monitoring and control (digital)
|
Interfaces
|
RS232, RS485 (4-wire, 2-wire strapable)
|
|
Data format
RS232
RS485
|
9600 bit/s, 8 bits no parity, 1 stop bit, ASCII protocol
User selectable format and protocol
|
|
Connector
|
MIL-C-26482 12-14S
|
Monitoring and control functions
Serial interface functions
Power amplifier on, Output power, Temperature, Fault status, Model number, Serial number, Software version, Compensation frequency, Transmit attenuator, Burst threshold, Packet address, Packet protocol.
Other monitoring functions
Loss of lock causes alarm contact closure, reduces BUC current drain by >50% and attenuates RF output by >70 dB. LED indicators for: Power on, Transmit on and BUC fault.
Power
Power supply options
|
24 V nominal (CODAN 6904)
|
19 to 35 V DC
|
|
48 V nominal (C0DAN 6904, 6908)
|
42 to 60 V DC
|
Power connector options
|
CODAN 6904, 6908
|
Via transmit IF connector
|
|
CODAN 6908
|
Via external DC input connector
|
Power consumption
|
CODAN 6904
|
80W maximum
|
|
CODAN 6908
|
115W maximum
|
Environmental
|
Operating temperature range
|
-40°Ñ to +50°Ñ
|
|
Relative humidity
|
100%
|
|
Cooling
CODAN 6904
CODAN 6908
|
Convection
Forced air
|
|
Weatherproofing
|
Sealed to 34 kPa
|
Physical
Size
|
CODAN 6904
|
360mm L x 182mm W x 104mm H
|
|
CODAN 6908
|
360mm L x 182mmW x 137mm H
|
Weight
|
CODAN 6904
|
5.4 kg
|
|
CODAN 6908
|
5.7 kg
|
Mounting
|
CODAN 6904, 6908
|
Feed mount standard
Boom mounting kit optional
|
